<html><body> <DIV>Will,</DIV> <DIV> </DIV> <DIV>You crack me up.  Be sure to get a tripod, too.  ;-)</DIV> <DIV> </DIV> <DIV>Barbara</DIV> <DIV> </DIV> <BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message -------------- From: "Will Truitt" <surfdog@metrocast.net> > Barbara, > > I have been utterly overwhelmed by a sense of shame and guilt since you > posted this reply. I can't sleep at night. I've lost my zest for living! > :-{ > > My therapist told me that the only way I could resolve this inner conflict > would be to buy a digital camera. So I have ordered one. I'm feeling > better already! :-) > > I hope to be able to post pictures of my hammer tapering rig (for hammers > that are mounted on shanks) by next weekend for those of you who have > requested that I do so. > > Will Truitt > > > > -----Original Message----- > From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf > Of Barba ra Richmond > Sent: Tuesday, August 26, 2008 11:01 PM > To: Pianotech List > Subject: Re: hammer thickness trimming jig, found mine! > > For crying out loud, Will, go out and spend a hundred bucks on a camera and > tripod. You probably don't even need to download any software, your windows > > program (if that's what you use) will most likely save the pictures when you > > plug in the USB cable that comes with the camera. Please use the tripod, > too--that will minimize any camera shake (=out of focus) and if you use the > camera's timer, there will be absolutely no shake and you can set up the > photo with your hands free to model in the picture ((holding the jig as it > glides through, etc.) When you have a good picture downloaded to the > computer, click on it, and somewhere you'll see an option to email it. If > you're sending a picture to me, please send the original , full size file and > > I'll edit it. If you're sending it to pianotech, you may choose the option > of a smaller file. > > Call me, I'd be happy to help. > > Barbara Richmond, RPT > Associate Journal Editor > > > > ----- Original Message ----- > From: "Will Truitt" <SURFDOG@METROCAST.NET> > To: "'Pianotech List'" <PIANOTECH@PTG.ORG> > Sent: Tuesday, August 26, 2008 7:05 PM > Subject: RE: hammer thickness trimming jig, found mine! > > > > Please forgive me for not offering you a photograph, I am one of those > > Luddites who still does not own a digital camera. > > > > > > > > </BLOCKQUOTE></body></html>