<html>
<!-- BEGIN WEBMAIL STATIONERY -->
<head></head>
<body>
<!-- WEBMAIL STATIONERY noneset -->
<DIV>List,</DIV>
<DIV>Just completed Yamaha spring loop replacement. Followed Tom D's method. Went well , and after filing hammers, cleaning slots , cutting cord, and glueing new cords, it took about 6hrs.</DIV>
<DIV> </DIV>
<DIV>When I installed the action back in the piano(p-22) , all of the hammers were way up off the rail and blocking when played. The solution I took was to lower capstans and lower let-off button and reset backcheck distance.</DIV>
<DIV> </DIV>
<DIV>My question is: What caused the capstans to change their relationship to the whippens so drasticaly ?</DIV>
<DIV> </DIV>
<DIV>Thanks,</DIV>
<DIV>Rick Ucci/Ucci Piano</DIV>
<!-- END WEBMAIL STATIONERY -->
</body>
</html>