Why make anything "easy"?  LOL;   Nice, Ron!  Oh wait! I have no contact cement in the shop!!  Now, more difficult!  PVC-E; plenty. Oh, the dilemma!! Paul <table width=100%> <tr valign=top> <td>From: <td>"Gerald Groot" <tunerboy3@comcast.net> <tr valign=top> <td>To: <td><pianotech@ptg.org> <tr valign=top> <td>Date: <td>03/05/2011 01:50 PM <tr valign=top> <td>Subject: <td>Re: [pianotech] Type of glue for a Kawai</table> <hr noshade> <tt>Great idea.  Never thought of trying it that way.  Probably because, that would be too easy...  :) Jer -----Original Message----- From: pianotech-bounces@ptg.org [</tt><a href="mailto:pianotech-bounces@ptg.org"><tt>mailto:pianotech-bounces@ptg.org</tt></a><tt>] On Behalf Of Ron Nossaman Sent: Saturday, March 05, 2011 2:33 PM To: pianotech@ptg.org Subject: Re: [pianotech] Type of glue for a Kawai On 3/5/2011 1:24 PM, Paul T Williams wrote: > Jer, > > That's why I like the PVC-E glue. Although it takes a little longer to > set, you do have a couple minutes to "play" with the items to line up > where you want them. Just a thought... You can use contact cement just like PVCE for this, assembling it wet, and pressing it down again a few minutes later. Works fine, and no alignment problems. Ron N </tt>