Any time! Paul <table width=100%> <tr valign=top> <td>From: <td>"Gerald Groot" <tunerboy3@comcast.net> <tr valign=top> <td>To: <td><pianotech@ptg.org> <tr valign=top> <td>Date: <td>03/05/2011 01:35 PM <tr valign=top> <td>Subject: <td>Re: [pianotech] Type of glue for a Kawai</table> <hr noshade> Thanks Paul! Jer   From: pianotech-bounces@ptg.org [<a href="mailto:pianotech-bounces@ptg.org">mailto:pianotech-bounces@ptg.org</a>] On Behalf Of Paul T Williams Sent: Saturday, March 05, 2011 2:24 PM To: pianotech@ptg.org Subject: Re: [pianotech] Type of glue for a Kawai   Jer, That's why I like the PVC-E glue.  Although it takes a little longer to set, you do have a couple minutes to "play" with the items to line up where you want them.  Just a thought... Paul <table width=100%> <tr valign=top> <td width=17%>From: <td width=82%>"Gerald Groot" <tunerboy3@comcast.net> <tr valign=top> <td>To: <td><pianotech@ptg.org> <tr valign=top> <td>Date: <td>03/05/2011 01:21 PM <tr valign=top> <td>Subject: <td>Re: [pianotech] Type of glue for a Kawai</table>   <div align=center> <hr noshade></div> I've had great luck using contact cement.  You have to be very careful lining the felt up because you really only get one chance at getting it correct with that stuff so you want to make sure everything is lined up correctly before you glue it down. Jer -----Original Message----- From: pianotech-bounces@ptg.org [<a href="mailto:pianotech-bounces@ptg.org">mailto:pianotech-bounces@ptg.org</a>] On Behalf Of David Weiss Sent: Saturday, March 05, 2011 12:57 PM To: pianotech@ptg.org Subject: Re: [pianotech] Type of glue for a Kawai While we're on the subject: I'm replacing the felt on a muffler rail on an upright.  (Mouse damage.)  What's the best glue for gluing the felt to the metal rail? David Weiss -----Original Message----- From: pianotech-bounces@ptg.org [<a href="mailto:pianotech-bounces@ptg.org">mailto:pianotech-bounces@ptg.org</a>] On Behalf Of Don Mannino Sent: Friday, March 04, 2011 11:47 PM To: pianotech@ptg.org Subject: Re: [pianotech] Type of glue for a Kawai Phil, As you found, wood glue does not adhere well to plastics.  Common choices are PVC-E, PVC-A, C/A glue (needs to be very thick C/A to prevent soaking into the felt too much), or epoxy. The PVC glues are good to carry because they also work well for minor wood repairs in many cases. Don Mannino -----Original Message----- From: pianotech-bounces@ptg.org [<a href="mailto:pianotech-bounces@ptg.org">mailto:pianotech-bounces@ptg.org</a>] On Behalf Of Phil Ryan Sent: Friday, March 04, 2011 3:19 PM To: pianotech@ptg.org Subject: [pianotech] Type of glue for a Kawai I replaced a butt-felt on a Kawai upright piano that had fallen off somewhere and the jack was making noise.  The piano was the new carbon fiber (black plastic) type of action.  I used some white glue I had in my case and when it got tacky I reassemble it.   Worked fine!  Played it a hundred times.  Day later I get a call-back, the jack is clanking again.  Did I use the wrong type of glue for this material?  CA perhaps? Phil Ryan Miami Beach