There should be a narrow cardboard shim on the bottom of the cheekblock. With some care you can use a razor blade or sharp knife to remove some layers from the cardboard. This will give you more downpressure on the keyframe. pin, if that turns out to be the problem.<br>
<br>Ry<br><br><div class="gmail_quote">On Tue, Mar 29, 2011 at 11:53 PM, David Nereson <span dir="ltr">&lt;<a href="mailto:da88ve@gmail.com">da88ve@gmail.com</a>&gt;</span> wrote:<br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
   Or the left (bass) keyblock screw isn&#39;t tight, or the keyframe guide pin hold-down is loose or isn&#39;t really holding down the left end of the keyframe, thus allowing the end of the keyframe to sit above the keybed a tiny bit, and slapping against it when playing the lowest keys.  Also check the damper upstop rail and the keystop rail for loose screws.<br>
<font color="#888888">
   --David Nereson, RPT</font><div class="im"><br>
<br>
----- Original Message ----- From: &quot;Don Mannino&quot; &lt;<a href="mailto:donmannino@ca.rr.com" target="_blank">donmannino@ca.rr.com</a>&gt;<br>
To: &lt;<a href="mailto:pianotech@ptg.org" target="_blank">pianotech@ptg.org</a>&gt;<br>
Sent: Tuesday, March 29, 2011 5:28 PM<br>
Subject: Re: [pianotech] Bass Key Slap<br>
<br>
<br>
</div><div><div></div><div class="h5"><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
My first thought is the keyframe needs bedding.<br>
<br>
Don Mannino<br>
<br>
-----Original Message-----<br>
From: <a href="mailto:pianotech-bounces@ptg.org" target="_blank">pianotech-bounces@ptg.org</a> [mailto:<a href="mailto:pianotech-bounces@ptg.org" target="_blank">pianotech-bounces@ptg.org</a>] On Behalf<br>
Of Arlie Rauch<br>
Sent: Tuesday, March 29, 2011 4:27 PM<br>
To: <a href="mailto:pianotech@ptg.org" target="_blank">pianotech@ptg.org</a><br>
Subject: [pianotech] Bass Key Slap<br>
<br>
I was tuning a customer&#39;s Steinway today, and she wanted me to look also at<br>
her Schimmel grand.  She heard noises, in the key she thought, in the lowest<br>
notes.  I couldn&#39;t hear it at first, but then I did when thumping the lowest<br>
8 or so notes--it sounded like a slap when the bottom of the key contacted<br>
the front rail felt.  First I thought maybe the front rail felt is too hard,<br>
but on my hour-drive home, I thought maybe the cause is elsewhere.  Why can<br>
you hear that on the lowest bass notes, but when you play up higher the<br>
sound is gone?  Maybe something is loose at the bass end in the action or<br>
the keybed.  Any suggestions?  I hope to remedy this sometime when I go<br>
back.<br>
<br>
Arlie Rauch<br>
Glendive, MT<br>
<br>
<br>
</blockquote>
<br>
</div></div></blockquote></div><br><br clear="all"><br>-- <br>Ryan Sowers, RPT<br>Puget Sound Chapter<br>Olympia, WA<br><a href="http://www.pianova.net">www.pianova.net</a><br>