<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content="text/html; charset=iso-8859-1" http-equiv=Content-Type> <META name=GENERATOR content="MSHTML 8.00.6001.19046"> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT size=2 face=Arial>Randy,</FONT></DIV> <DIV><FONT size=2 face=Arial>If you get no response, give me a call. If I remember correctly that part is a simple 2 dimension milled part. I could duplicate it on my milling machine.</FONT></DIV> <DIV><FONT size=2 face=Arial>Roger</FONT></DIV> <BLOCKQUOTE style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px" dir=ltr> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B> <A title=randyrush@earthlink.net href="mailto:randyrush@earthlink.net">Randy Rush</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, May 11, 2011 10:58 AM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> [pianotech] Parts for Baldwin grand?</DIV> <DIV><BR></DIV>Greetings, <DIV><BR></DIV> <DIV>I need a specific part for a pre-Gibson (but fairly young) Baldwin grand, specifically the metal bracket fitted into the recess of the cheek block that holds down the action by applying pressure to the end pin in the action frame.  I need to replace a broken one, Gibson is apparently not supplying parts, and there's not dealer in the Seattle area I can contact to get parts, or even see if the same style part is being used in current Baldwin grands.</DIV> <DIV><BR></DIV> <DIV>Can anyone on this list working for a Baldwin dealer tell me if the part is still the same and/or put me in touch with a Baldwin dealer?</DIV> <DIV><BR></DIV> <DIV>Thanks for your help,</DIV> <DIV><BR></DIV> <DIV>Randy Rush</DIV></BLOCKQUOTE></BODY></HTML>