<div>Serviced a two year old Boston grand today and needed to pull the action to find out why b5 and c6 keys were binding. In the attempt to remove the fallboard, I found what looked like a plastic coated wire attached to the rear of the fallboard.  The attached wire ran down between two keys, through a hole in the keybed, and hooked onto a mechanism underneath the piano that operated in such fashion as to produce a slow fall of the fallboard.</div>
<div> </div><div>Has anyone on this list had any experience with this type of mechanism?  If so, who might be a distributor? Better yet, who might be the manufacturer.  I need to know how to go about detaching the wire in order to pull the action without damaging the mechanism.</div>
<div> </div><div>Wesley Hardman, RPT</div><div>Scottsboro, Alabama</div>