<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Arial; font-size: 12pt; color: #000000'>Last week I used mine to trim key plugs. Barbara Richmond, RPT near Peoria, Illinois <hr id="zwchr">From: "Ron Nossaman" <rnossaman@cox.net> To: pianotech@ptg.org Sent: Saturday, August 20, 2011 2:26:58 PM Subject: Re: [pianotech] Multifunction tool On 8/20/2011 2:09 PM, Joseph Garrett wrote: > Not anymore. It took me longer to track > down all of the wayward shank ends, than it did to cut them off! Many > thanks Ron. You betcha Joe. I've always been willing to be spoiled, and I assume others are too. I recently used it to trim the shoe peg and dowel plugs on a bridge root I recapped. Absolutely terrific! Another thing about plugging bridge roots with wood (instead of thickened epoxy): Dale Erwin had complained that Titebond was gummy when he drilled the new holes. The Franklin Assembly 65 that WN&G sells dries harder and drills (and saws) very cleanly. Recommended for this use, and any other that needs a hard cold glue. It won't replace Titebond for me, but it's a first rate addition. Ron N </div></body></html>