<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19120">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>Richard,</DIV>
<DIV>Most of the reason for sticky on/off buttons is something is spilled on
it. The cap on the switch should pop off if you can see "daylight" around
the button. With the cap off, see if it works smoothly. If it does, the cap may
have swelled a little. Use an "exacto" knife to trim around the edges of
the cap and reinstall.</DIV>
<DIV> </DIV>
<DIV>If the actual switch is "sluggish", yes, spray some contact cleaner in
around the shaft of the switch.</DIV>
<DIV><BR>Ken Gerler</DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px"
dir=ltr>
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=richarducci@comcast.net href="mailto:richarducci@comcast.net">Richard
Ucci</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, September 13, 2011 4:13
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [pianotech] Sticky dc
button</DIV>
<DIV><BR></DIV>
<DIV>Thanks Barb, I emailed the list after 20 min. on hold. Figured it might
be faster.<BR><BR>Rick Ucci/ Ucci Piano
<DIV><A href="http://www.uccipiano.com">www.uccipiano.com</A> </DIV>
<DIV><BR></DIV></DIV>
<DIV><BR>On Sep 13, 2011, at 4:38 PM, Barbara Richmond <<A
href="mailto:piano57@comcast.net">piano57@comcast.net</A>>
wrote:<BR><BR></DIV>
<DIV></DIV>
<BLOCKQUOTE type="cite">
<DIV>
<DIV
style="FONT-FAMILY: Arial; COLOR: #000000; FONT-SIZE: 12pt">1-800-854-1569
<BR><BR>
<HR id=zwchr>
<B>From: </B>"Richard Ucci" <<A
href="mailto:richarducci@comcast.net">richarducci@comcast.net</A>><BR><B>To:
</B><A href="mailto:pianotech@ptg.org">pianotech@ptg.org</A><BR><B>Sent:
</B>Tuesday, September 13, 2011 2:47:47 PM<BR><B>Subject: </B>[pianotech]
Sticky dc button<BR><BR>List, I have a sticky on/off button on a 15yr old
Yammy.<BR>Is it ok to spray some contact cleaner in the slits around the
button? <BR>Or does the head have to be taken apart to
correct?<BR><BR>Rick Ucci/ Ucci
Piano<BR>www.uccipiano.com<BR><BR></DIV></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>