<HTML><HEAD></HEAD> <BODY dir=ltr> <DIV dir=ltr> <DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt"> <DIV style="FONT-FAMILY: ; COLOR: "> <DIV>I encountered a Geo Broadbent straight-strung grand piano with tuning pins as shown. Piano is over 100 years old. Although the pin shown is a bit chewed up from some previous tech (not this one) using vise grips, it it pretty close to the other undamaged ones still in the piano. No tuning lever tip I have seen will fit this, as the pin is rectangular in shape, .2”x.26” roughly. The pins are threaded into the block with a pretty coarse thread. </DIV> <DIV> </DIV> <DIV></DIV> <DIV></DIV> <DIV></DIV> <DIV>Does anyone know where to find a hammer tip that would fit this type pin? The piano was moved here from South Africa, where apparently the techs had no trouble tuning it :}</DIV> <DIV> </DIV> <DIV></DIV> <DIV></DIV> <DIV>Also the piano is sitting at about 100c flat to A440, but I was assuming it was designed to be tuned at A415 anyway. Any thoughts on this also? Thanks</DIV> <DIV> </DIV> <DIV></DIV> <DIV></DIV> <DIV>Dave Smith</DIV> <DIV>SW FL</DIV></DIV></DIV></DIV></BODY></HTML>