<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.17102" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>If you haven't invested in a heat gun, this is a
good excuse to get one. Prices can vary from $30-$75, Milwaukee being the best
one( and by far) the longest lasting gun on the market.</FONT></DIV>
<DIV><FONT face=Arial size=2>Heat guns can dissolve just about any glue adhesion
within 15 seconds. Many of the solvents you've tried will be speed up in
dramatic fashion with the heat gun added to the mix.</FONT></DIV>
<DIV><FONT face=Arial size=2>In addition to the removal aspect of shank and
hammer removal, you'll find it particularly handing when burning the shanks
after you've installed your new hammers.</FONT></DIV>
<DIV><FONT face=Arial size=2>Tom Servinsky</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=edwcarw@yahoo.com href="mailto:edwcarw@yahoo.com">Ed Carwithen</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Piano List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, October 01, 2011 4:01
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [pianotech] hammer removal</DIV>
<DIV><BR></DIV>
<DIV
style="FONT-SIZE: 12pt; COLOR: #000; FONT-FAMILY: times new roman, new york, times, serif; BACKGROUND-COLOR: #fff">
<DIV><SPAN class=tab> I need to replace the hammers on an
upright piano. Schaff wants the sample hammers with the shaft
attached. No matter what kind of solvent I have tried the shaft stays
fimly in the butt, and comes out of the hammer. Yes, I am using the
right hammer/butt extractor. Yes, I have removed the glue collar around
the shaft on the butt end. I have tried the wall paper paste solvent,
glue remover and acetone. No cigar! What will actually dissolve
the old glue? Any Ideas?????</SPAN></DIV>
<DIV><SPAN class=tab></SPAN> </DIV>
<DIV><SPAN class=tab>Ed Carwithen</SPAN></DIV>
<DIV><SPAN class=tab>John Day, OR</SPAN></DIV></DIV></BLOCKQUOTE></BODY></HTML>