Thanks Larry and Wim.<div><br></div><div>lim<br><br><div class="gmail_quote">On Sat, Nov 12, 2011 at 9:43 PM, Larry Fisher RPT <span dir="ltr">&lt;<a href="mailto:larryf@pacifier.com">larryf@pacifier.com</a>&gt;</span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
<div dir="ltr">
<div dir="ltr">
<div style="font-family:&#39;Calibri&#39;;color:#000000;font-size:12pt"><font face="Times New Roman">Lim<br><br>1. When putting the action back in the piano 
it is advised that just before the action is getting to the dampers, which is 
also the time the back of the keys move over the plungers of the piano disc, 
that you press all the keys down. The easiest way to do this is to take the 
front rail, lay it on the keys so that it hits the sharps and white keys at the 
same time, and press the keys down. This raises the backs of all the keys to 
allow them to clear the plungers. </font><br><br><strong>Press the sustain pedal 
to lift all the dampers up to clear the backs of the keys that are also up with 
all the keys pressed down.  If you don’t, you’ll most likely peal a few 
damper lifter felts off to help you learn not to do that 
again.</strong></div></div></div>
</blockquote></div><br></div>