<html><body bgcolor="#FFFFFF"><div>What is the ratio of water to alcohol ?<br><br>Rick Ucci<div><a href="http://Uccipiano.com">Uccipiano.com</a></div></div><div><br>On Nov 22, 2011, at 9:42 AM, <a href="mailto:chrisstor@aol.com">chrisstor@aol.com</a> wrote:<br><br></div><div></div><blockquote type="cite"><div><font color="black" size="2" face="arial"> <div>Tom et al,</div> <div> </div> <div>The gas line antifreeze "Heet" is methyl alcohol.</div> <div><a href="http://www.goldeagle.com/brands/heet/default.aspx"><a href="http://www.goldeagle.com/brands/heet/default.aspx">http://www.goldeagle.com/brands/heet/default.aspx</a></a></div> <div> </div> <div>The MSDS information is here, indicating that it's methyl alcohol with apparently no other proprietary ingredients:</div> <div><a href="http://www.imperialsupplies.com/msds0055060.shtml"><a href="http://www.imperialsupplies.com/msds0055060.shtml">http://www.imperialsupplies.com/msds0055060.shtml</a></a></div> <div> </div> <div>The advantage of methyl alcohol is that it evaporates quickly, allowing you to do the center pin bushing sizing procedure with less time spent waiting for the centers to free up.  But the corresponding disadvantage is its flash point.  Probably not a smart idea to use a heat gun to hasten the drying process with methyl.</div> <div> </div> <div>Chris Storch</div> </font></div></blockquote></body></html>