David, If you are referring to your suggestion that alcohol-water solutions rather than naphtha be applied to stuck Baldwin centers, one reason might be the alcoho-water procedure was the manufacturer&#39;s suggested procedure. I know naphtha has been a traditional (perhaps even taught by Bill Garlick at NBSS in the &#39;70s?) approach, but I have never been enamored by that choice.<div>

I tend to find tight Baldwin centers gummy with some waxy substance, and either ream (Mannino style) and repin<br><br><div class="gmail_quote">On Sun, Nov 27, 2011 at 8:33 AM, David Skolnik <span dir="ltr">&lt;<a href="mailto:davidskolnik@optonline.net" target="_blank">davidskolnik@optonline.net</a>&gt;</span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
Meanwhile, what&#39;s the chance that my original question might be addressed, or at least deemed equally irrelevant?<br>
<br>
David Skolnik<br>
Hastings on Hudson, NY<br><br></blockquote></div></div>