Check to see if the bridle wire is contacting the backcheck wire.<div><br></div><div>-- <br><div>John Formsma, RPT<br></div><div>Blue Mountain, MS</div></div><div><br><br><div class="gmail_quote">On Fri, Dec 2, 2011 at 8:36 PM, <span dir="ltr"><<a href="mailto:richarducci@comcast.net">richarducci@comcast.net</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">I'm thinking whip screws also.<br>
<br>
Rick Ucci<br>
Uccipiano.com<br>
<div class="HOEnZb"><div class="h5"><br>
On Dec 2, 2011, at 5:17 PM, "Tom Driscoll" <<a href="mailto:tomtuner@verizon.net">tomtuner@verizon.net</a>> wrote:<br>
<br>
> Richard,<br>
> I was gonna suggest the grommets but Duaine beat me to it.<br>
> After the last post from you I'm thinking loose whippen screws .<br>
> Without removing the action you can lie on the floor and gently insert a screwdriver between an offending note and the neighboring flange whilst playing the key.<br>
> The side pressure will stop the flange from moving between the rail and the screw. The telltale loose flange noise will stop if indeed that's the problem.<br>
> Then you can propose to remove the action to tighten the screws (after you have a new set of grommets on hand ) and tend to the other possible- likely problems . Loose hammer heads and catcher shanks, squeaky damper rod , it's bushings and the spoons.<br>
> This ain't the most exciting of projects but with a few hours effort a spinet can rise to an acceptable level for many players . --Now if it's a "Grand " spinet, Kincaid or most Kimball Whitneys then I'd punt.<br>
> Tom D.<br>
> P.S --check the letoff rail screws at the forks also.<br>
><br>
> ----- Original Message ----- From: <<a href="mailto:richarducci@comcast.net">richarducci@comcast.net</a>><br>
> To: <<a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a>><br>
> Sent: Friday, December 02, 2011 3:44 PM<br>
> Subject: Re: [pianotech] Wurlitzer spinet<br>
><br>
><br>
>> Put a new one on , still noisy , ca glued the metal fork, tightened butt flange screws.<br>
>> Also makes noise when hammer falls back on rest rail.<br>
>><br>
>> Rick Ucci<br>
>> Uccipiano.com<br>
>><br>
>> On Dec 2, 2011, at 3:26 PM, Duaine Hechler <<a href="mailto:dahechler@att.net">dahechler@att.net</a>> wrote:<br>
>><br>
>>> On 12/02/2011 02:16 PM, <a href="mailto:richarducci@comcast.net">richarducci@comcast.net</a> wrote:<br>
>>>> List,<br>
>>>> Has anyone had a rattling type noise when letting up on the key with this piano? It's not on all keys, and when you tap on the key it makes the noise but with the rod disconnected it does not.<br>
>>>><br>
>>>> Rick Ucci<br>
>>>> Uccipiano.com<br>
>>> Sound like it could be the rubber grommet - either disintegrating or missing - under the lost motion adjustment nut.<br>
>>><br>
>>> my 2 cents<br>
>>><br>
>>> --<br>
>>> Duaine Hechler<br>
>>> Piano, Player Piano, Pump Organ<br>
>>> Tuning, Servicing& Rebuilding<br>
>>> Reed Organ Society Member<br>
>>> Florissant, MO 63034<br>
>>> <a href="tel:%28314%29%20838-5587" value="+13148385587">(314) 838-5587</a><br>
>>> <a href="mailto:dahechler@att.net">dahechler@att.net</a><br>
>>> <a href="http://www.hechlerpianoandorgan.com" target="_blank">www.hechlerpianoandorgan.com</a><br>
>>> --<br>
>>> Home& Business user of Linux - 11 years<br>
><br>
</div></div></blockquote></div><br><br clear="all"><div><br></div><br>
</div>