Someone at this past annual convention mentioned doing your favorite method of ivory removal, then tossing the ivories into a basin of warm water and a bit of dishwasher soap. Said they come out really clean after they have soaked a while. No scrubbing, scraping, or sanding needed. I think they might tend to warp, but you can set something flat and heavy on them...or perhaps clamp.<div>
<br></div><div>If Bill Monroe remembered all his stuff better, he would have already chimed in with this info. He was sitting right next to me the whole time. Shame on his forgetful memory.... ;-)</div><div><br></div><div>
-- <br><div>John Formsma, RPT<br></div><div>Blue Mountain, MS</div></div><div><br><br><div class="gmail_quote">On Sat, Jan 7, 2012 at 4:47 PM, Chuck Behm <span dir="ltr"><<a href="mailto:behmpiano@gmail.com">behmpiano@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="im"> >I'm wondering about methods to safely remove old ivories from junk
pianos. I've got a junker that has ivories in reasonable condition and
I'd like to try and remove them for future re-use. Every attempt I've
made in the past has resulted in them breaking into pieces. I've heard
of techniques ranging from using a steam iron to soaking the keys, even
dampening them and placing them in a microwave. Is there a proven
sure-fire way to remove them without breaking them? Even if one breaks
the set will no longer match. Rob Goodale<br><br></div>Rob - what's always worked well for me is to take an old wash cloth, soak it in a bowl of water and wring it out. Put the keystick in your vise and cover with the cloth, then put an old iron at medium setting on top for several seconds (experiment with times). Ivories will usually pry off with a putty knife (don't use a chisel). Start at the front and work towards the back of the head piece, rocking your putty knife back and forth. You'll break a few this way, but will be able to save most. <br>
<br>Toss each ivory in a drawer intended for that particular note to make selection easier down the road. I like to clean them with 0000 steel wool after they dry, then buff them on a cloth wheel with ivory polish. Scrape any residue off on the backs with a sharp chisel. Chuck<br>
</blockquote></div><br><br clear="all"><div><br></div><br>
</div>