<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content="text/html; charset=US-ASCII" http-equiv=Content-Type> <META name=GENERATOR content="MSHTML 9.00.8112.16440"></HEAD> <BODY style="FONT-FAMILY: Arial; COLOR: #000000; FONT-SIZE: 10pt" id=role_body bottomMargin=7 leftMargin=7 rightMargin=7 topMargin=7><FONT id=role_document color=#000000 size=2 face=Arial> <DIV>  Hello to All.</DIV> <DIV> </DIV> <DIV>       Put a thick center rail punching under the hammer rail </DIV> <DIV> and the  the action bracket . This will move the hammers </DIV> <DIV>closer to the strings. Then move the top of the action brackets </DIV> <DIV>toward the keys to correct blow distance and adjust lost motion. </DIV> <DIV>on a few keys </DIV> <DIV>   Check results. If this does not work add another center </DIV> <DIV>rail punching. and repeat  </DIV> <DIV>    </DIV> <DIV>     I did not go into great detail. I think most techs can handle </DIV> <DIV>. this.</DIV> <DIV>      All  Spinets does not have the same action.  At this point</DIV> <DIV>we do not have any idea what brand or type of  SPINET action</DIV> <DIV>we  are talking about.</DIV> <DIV> </DIV> <DIV>Regards to All</DIV> <DIV> </DIV> <DIV>Jack Wyatt </DIV> <DIV>Dallas, Chapter</DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV>In a message dated 1/6/2012 8:45:01 A.M. Central Standard Time, pianodoctor@msn.com writes:</DIV> <DIV> <BLOCKQUOTE style="BORDER-LEFT: blue 2px solid; PADDING-LEFT: 5px; MARGIN-LEFT: 5px"><FONT style="BACKGROUND-COLOR: transparent" color=#000000 size=2 face=Tahoma> <DIV dir=ltr>Spinet piano where the jacks on several keys are not returning quick enough to allow repetition.  I suspect the jack pin needs lubed.  Any suggestions on lubing this part without removing the action.  I understand removing a spinet action can be troublesome.<BR></DIV>=</FONT></BLOCKQUOTE></DIV></FONT></BODY></HTML>