<html>
<body>
Wim -<br>
When did you originally post those?<br>
David Skol<br><br>
<br>
At 12:45 PM 1/25/2012, you wrote:<br>
<blockquote type=cite class=cite cite=""><font size=2>David<br>
<br>
I'm the one who posted those pictures of a Ludwig grand with this design.
I don't have the picture anymore, but I'm tuning this piano on April 9th.
I'll be happy to take a few more pictures. <br>
<br>
Wim<br><br>
<br><br>
<br>
-----Original Message-----<br>
From: David Stanwood <stanwood@tiac.net><br>
To: pianotech <pianotech@ptg.org><br>
Sent: Wed, Jan 25, 2012 2:35 am<br>
Subject: [pianotech] Screw Adjustable Key leveling<br><br>
<br>
</font><tt>Years ago I saw a piano built with screws down through the key
just <br>
behind the balance rail bushing. This is an old design. The
bottom <br>
of the screw contacted the back side of the balance rail cloth <br>
punching and the keys could be leveled by turning the screw. I'd
<br>
love to get a picture of this design for my class "Off Center
Balance <br>
Rail Bearings". Any help would be appreciated. <br><br>
David Stanwood<br>
</tt><font face="Courier New, Courier"></font></blockquote></body>
<br>
</html>