<font color='black' size='2' face='Arial, Helvetica, sans-serif'>
<div>Laura</div>


<div>&nbsp;</div>


<div>The rubber bushing in which the pin sits could also be worn out, missing, or too hard. </div>


<div>&nbsp;</div>


<div>Wim<br>
<br>
</div>


<div style="CLEAR: both">

<div>&nbsp;</div>
</div>
<br>
<br>


<div style="FONT-FAMILY: arial,helvetica; COLOR: black; FONT-SIZE: 10pt">-----Original Message-----<br>
From: Mark S Burgett &lt;markb@pianodisc.com&gt;<br>
To: pianotech &lt;pianotech@ptg.org&gt;<br>
Sent: Mon, Jan 30, 2012 1:10 pm<br>
Subject: Re: [pianotech] Kawai GS-50 damper tray<br>
<br>


<div style="BACKGROUND-COLOR: #fff; MARGIN: 0px; FONT-FAMILY: Tahoma, Verdana, Arial, Sans-Serif; COLOR: #000; FONT-SIZE: 12px" id=AOLMsgPart_0_16758ae2-5911-4e09-b0aa-dd19a16e5080><PRE style="FONT-SIZE: 9pt"><TT>Hi Laura,

Check the metal pin in the dowel that lifts the damper tray.  It the pin
is too long it can contact the tray.  I had this problem once and it
drove me crazy until I found it.

Mark Burgett

-----Original Message-----
From: <A href="mailto:pianotech-bounces@ptg.org">pianotech-bounces@ptg.org</A> [<A href="mailto:pianotech-bounces@ptg.org?">mailto:pianotech-bounces@ptg.org</A>] On
Behalf Of Laura Olsen
Sent: Monday, January 30, 2012 2:33 PM
To: <A href="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
Subject: [pianotech] Kawai GS-50 damper tray

I found a problem I couldn't solve while I was at the piano and I
thought: "I know, I'll use a "life line" and ask the experts!"  You are
my "experts" so here goes:

It's a  Kawai GS-50 with a rattle in the damper tray when you release
the sustain pedal.  When I lift and drop certain damper blocks I can
kind of duplicate the rattle in the aluminum rail. 

I tightened the screws that hold the damper tray to the belly rail.  I
checked damper under lever screws.  I tightened the screws in the damper
blocks the hold the damper wires.  The tabs aren't hitting the sos. rod
and the Sostenuto rod bracket screws are tight.   The damper under lever
screws are tight.

What am I missing?

Thanks in advance for your thoughts.

Laura Olsen




</TT></PRE></div>
<!-- end of AOLMsgPart_0_16758ae2-5911-4e09-b0aa-dd19a16e5080 --></div>
</font>