<html><head></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I also use super glue.<div>But the secret is to use two coats on the felt.</div><div>When I first used it the felt soaked up the glue, and the joint was starved, and was hit and miss.</div><div>Since i started to put it on the felt first, then reapply to the felt and wood later once the first coat on the felt had set. I have had no problem with failure.</div><div>I use a vise to hold the hammer felt in place, so it has some tension. I also use curved wooden parts flat on one side to be square with the vise jaw. Just cut out of scrap hardwood.</div><div>John Ross</div><div>Windsor, Nova Scotia.<br><div><div>On 04-02-2012, at 2:18 PM, <a href="mailto:tnrwim@aol.com">tnrwim@aol.com</a> wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite"><font color="black" size="2" face="Arial, Helvetica, sans-serif">
<div>Chuck</div>


<div>&nbsp;</div>


<div>I've used super glue, clamping the felt with vice grips. It sets up in about a&nbsp;minute. </div>


<div>&nbsp;</div>


<div>Wim<br>
<br>
</div>


<div style="CLEAR: both">

<div>&nbsp;</div>
</div>
<br>
<br>


<div style="FONT-FAMILY: arial,helvetica; COLOR: black; FONT-SIZE: 10pt">-----Original Message-----<br>
From: CHARLES BECKER &lt;<a href="mailto:cbeckercpt@verizon.net">cbeckercpt@verizon.net</a>&gt;<br>
To: PTG &lt;<a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a>&gt;<br>
Sent: Sat, Feb 4, 2012 4:59 am<br>
Subject: [pianotech] re-gluing loose hammer felt<br>
<br>


<div id="AOLMsgPart_1_29bc30ba-f91b-4b5d-a775-5eeb9a84e9fc">

<div><font size="2" face="Arial">Hello list,</font></div>


<div><font size="2" face="Arial"></font>&nbsp;</div>


<div><font size="2" face="Arial">What is the best glue to use when regluing loose hammer felt to the moulding?</font></div>


<div>&nbsp;</div>


<div><font size="2" face="Arial">Thanks in advance.</font></div>


<div><font size="2" face="Arial"></font>&nbsp;</div>


<div><font size="2" face="Arial">Chuck Becker</font></div>
</div>
<!-- end of AOLMsgPart_1_29bc30ba-f91b-4b5d-a775-5eeb9a84e9fc --></div>
</font></blockquote></div><br></div></body></html>