Can you perhaps glue it?<br><br>If not, be pretty easy to make, and you wouldn't have to wait.<br><br>John Formsma<br><br>On Monday, March 5, 2012, Wally Scherer <<a href="mailto:afinetune@yahoo.com">afinetune@yahoo.com</a>> wrote:<br>
> Dear Fellow Techs,<br>><br>> A customer of mine has a Baldwin spinet with broken supports for the fallboard. These seem easy enough to make, but first I thought I'd see if anyone had an old "throw away" spinet of this type from which two fallboard supports could be salvaged. These are the wood (or nylon) pieces on which the ends of the fallboard sit and and upon which it slides as you open or close it. Pictures attached.<br>
><br>> Thanks if anyone has a pair to spare. Please reply privately.<br>><br>> Wally<br>> -------------------------------------------------<br>> A FINE TUNE - Piano Tuning & Repairs<br>> Wallace T. Scherer, piano technician, music educator<br>
> Serving professional and amateur musicians since 1979<br>> 5020 Canal Drive, Lake Worth, Florida, 33463-8014<br>> Telephone: 561-432-4121<br>> Web page: <a href="http://aftune.angelfire.com">http://aftune.angelfire.com</a><br>
> ------------------------------------------------<br>> FREE TICKETS: <a href="http://aftune.angelfire.com/freetics.html">http://aftune.angelfire.com/freetics.html</a><br><br>-- <br><div>John Formsma, RPT<br></div><div>
Blue Mountain, MS</div><br>