<div>Hi List;</div><div>I tune regularly for a school system. The grand piano in the auditorium was not holding up to pitch so I applied CA glue to all but the high treble. As usual, it worked like a charm. However, spit-like foam surrounded the tuning pins, in some cases well past the coils and toward the top of the pins. In addition, the nickel plated pins turned a rust color. I&#39;ve done many CA glue jobs to tuning pins and have had minor foaming but never anything like this nor any pin discoloration. Could some solution have been on the pins/pinblock before the application? Any ideas or similar experiences? Thanks.</div>

<div>Jim Sasso</div><div>Atlantic Player Piano</div>