<html><head><base href="x-msg://75/"></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I like your idea also - simple and should do the trick perfectly.<div><br></div><div>Terry Farrell</div><div><br><div><div>On May 29, 2012, at 5:33 PM, Delwin D Fandrich wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite"><span class="Apple-style-span" style="border-collapse: separate; font-family: Helvetica; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-border-horizontal-spacing: 0px; -webkit-border-vertical-spacing: 0px; -webkit-text-decorations-in-effect: none; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; font-size: medium; "><div lang="EN-US" link="blue" vlink="purple"><div class="WordSection1" style="page: WordSection1; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 0cm; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: 'Comic Sans MS'; color: navy; ">That would do it….<o:p></o:p></span></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 0cm; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: 'Comic Sans MS'; color: navy; "><o:p> </o:p></span></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 0cm; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: 'Comic Sans MS'; color: navy; ">ddf<o:p></o:p></span></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 0cm; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: 'Comic Sans MS'; color: navy; "><o:p> </o:p></span></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 0cm; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); ">Delwin D Fandrich</span><span style="font-size: 10pt; font-family: Calibri, sans-serif; color: rgb(99, 36, 35); "><o:p></o:p></span></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 0cm; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); ">Piano Design & Fabrication</span><span style="font-size: 10pt; font-family: Calibri, sans-serif; color: rgb(99, 36, 35); "><o:p></o:p></span></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 0cm; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: Calibri, sans-serif; color: rgb(99, 36, 35); ">6939 Foothill Court SW,<span class="Apple-converted-space"> </span></span><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); ">Olympia, Washington 98512 USA<o:p></o:p></span></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 0cm; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); ">Phone 360.515.0119 — Cell 360.388.6525</span><span style="font-size: 10pt; font-family: Calibri, sans-serif; color: rgb(99, 36, 35); "><o:p></o:p></span></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 0cm; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); "><a href="mailto:del@fandrichpiano.com" style="color: blue; text-decoration: underline; "><span style="color: blue; ">del@fandrichpiano.com<span class="Apple-converted-space"> </span></span></a></span><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); ">—<span class="Apple-converted-space"> </span></span><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); "><a href="mailto:ddfandrich@gmail.com" style="color: blue; text-decoration: underline; "><span style="color: blue; ">ddfandrich@gmail.com</span></a></span><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: navy; "><o:p></o:p></span></div></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 0cm; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: 'Comic Sans MS'; color: navy; "><o:p> </o:p></span></div><div><div style="border-right-style: none; border-bottom-style: none; border-left-style: none; border-width: initial; border-color: initial; border-top-style: solid; border-top-color: rgb(181, 196, 223); border-top-width: 1pt; padding-top: 3pt; padding-right: 0cm; padding-bottom: 0cm; padding-left: 0cm; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><b><span style="font-size: 10pt; font-family: Tahoma, sans-serif; ">From:</span></b><span style="font-size: 10pt; font-family: Tahoma, sans-serif; "><span class="Apple-converted-space"> </span><a href="mailto:pianotech-bounces@ptg.org" style="color: blue; text-decoration: underline; ">pianotech-bounces@ptg.org</a><span class="Apple-converted-space"> </span>[mailto:pianotech-bounces@ptg.org]<span class="Apple-converted-space"> </span><b>On Behalf Of<span class="Apple-converted-space"> </span></b>Terry Farrell<br><b>Sent:</b><span class="Apple-converted-space"> </span>Tuesday, May 29, 2012 2:09 PM<br><b>To:</b><span class="Apple-converted-space"> </span><a href="mailto:pianotech@ptg.org" style="color: blue; text-decoration: underline; ">pianotech@ptg.org</a><br><b>Subject:</b><span class="Apple-converted-space"> </span>Re: [pianotech] S&S K(52) Restoration<o:p></o:p></span></div></div></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">I use my overhead drill press (mounted on my ceiling - moves x-y, up-down, tilts & swivels 360 degrees)!<o:p></o:p></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">Terry Farrell<o:p></o:p></div></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div><div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">On May 29, 2012, at 4:29 PM, Delwin D Fandrich wrote:<o:p></o:p></div></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><br><br><o:p></o:p></div><div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: 'Comic Sans MS'; color: navy; ">I use long “aircraft” drill bits guided by simple wood square with a “V” cut in the surface. The wood strip is aligned and clamped to the inside of the rim and the drill bit runs down the V to keep the hole straight and square.</span><o:p></o:p></div></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: 'Comic Sans MS'; color: navy; "> </span><o:p></o:p></div></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: 'Comic Sans MS'; color: navy; ">ddf</span><o:p></o:p></div></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: 'Comic Sans MS'; color: navy; "> </span><o:p></o:p></div></div><div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); ">Delwin D Fandrich</span><o:p></o:p></div></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); ">Piano Design & Fabrication</span><o:p></o:p></div></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: Calibri, sans-serif; color: rgb(99, 36, 35); ">6939 Foothill Court SW,<span class="apple-converted-space"> </span></span><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); ">Olympia, Washington 98512 USA</span><o:p></o:p></div></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); ">Phone 360.515.0119 — Cell 360.388.6525</span><o:p></o:p></div></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: 'Comic Sans MS'; color: rgb(99, 36, 35); "><a href="mailto:del@fandrichpiano.com" style="color: blue; text-decoration: underline; ">del@fandrichpiano.com<span class="apple-converted-space"> </span></a>—<span class="apple-converted-space"> </span><a href="mailto:ddfandrich@gmail.com" style="color: blue; text-decoration: underline; ">ddfandrich@gmail.com</a></span><o:p></o:p></div></div></div><div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: 'Comic Sans MS'; color: navy; "> </span><o:p></o:p></div></div><div><div style="border-right-style: none; border-bottom-style: none; border-left-style: none; border-width: initial; border-color: initial; border-top-style: solid; padding-top: 3pt; padding-right: 0cm; padding-bottom: 0cm; padding-left: 0cm; border-width: initial; border-color: initial; "><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><b><span style="font-size: 10pt; font-family: Tahoma, sans-serif; ">From:</span></b><span class="apple-converted-space"><span style="font-size: 10pt; font-family: Tahoma, sans-serif; "> </span></span><span style="font-size: 10pt; font-family: Tahoma, sans-serif; "><a href="mailto:pianotech-bounces@ptg.org" style="color: blue; text-decoration: underline; ">pianotech-bounces@ptg.org</a><span class="apple-converted-space"> </span><a href="mailto:[mailto:pianotech-bounces@ptg.org]" style="color: blue; text-decoration: underline; ">[mailto:pianotech-bounces@ptg.org]</a><span class="apple-converted-space"> </span><b>On Behalf Of<span class="apple-converted-space"> </span></b>Dean May<br><b>Sent:</b><span class="apple-converted-space"> </span>Tuesday, May 29, 2012 12:12 PM<br><b>To:</b><span class="apple-converted-space"> </span><a href="mailto:pianotech@ptg.org" style="color: blue; text-decoration: underline; ">pianotech@ptg.org</a><br><b>Subject:</b><span class="apple-converted-space"> </span>Re: [pianotech] S&S K(52) Restoration</span><o:p></o:p></div></div></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: Arial, sans-serif; color: navy; ">There is also McMaster-Carr,<span class="apple-converted-space"> </span><a href="http://www.mcmaster.com/" style="color: blue; text-decoration: underline; ">www.mcmaster.com</a>, and Bolt Depot,<span class="apple-converted-space"> </span><a href="http://www.boltdepot.com/" style="color: blue; text-decoration: underline; ">www.boltdepot.com</a>.</span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: Arial, sans-serif; color: navy; "> </span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: Arial, sans-serif; color: navy; ">I like adding thin washer between the inverted lock nut and the plate. Bearing washers against cast iron are always a good idea. Plus the washer helps keep the nut from wanting to turn as you adjust the stud up and down.</span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: Arial, sans-serif; color: navy; "> </span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: Arial, sans-serif; color: navy; ">Warning: if your holes are not perpendicular, your studs sticking up are not going to align with the plate holes very well as you lower it. You will have to turn your studs in deep, set plate in place, then raise studs through holes.</span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: Arial, sans-serif; color: navy; "> </span><o:p></o:p></div></div><div><p class="MsoAutoSig" style="margin-right: 0cm; margin-left: 72pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><b><span style="font-size: 20pt; font-family: 'Lucida Calligraphy'; color: navy; ">Dean</span></b><o:p></o:p></p><p class="MsoAutoSig" style="margin-right: 0cm; margin-left: 72pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: AGaramond; color: navy; ">Dean W May (812) 235-5272 voice and text</span><o:p></o:p></p><p class="MsoAutoSig" style="margin-right: 0cm; margin-left: 72pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: AGaramond; color: navy; "><a href="http://PianoRebuilders.com" style="color: blue; text-decoration: underline; ">PianoRebuilders.com</a> (888) DEAN-MAY </span><o:p></o:p></p><p class="MsoAutoSig" style="margin-right: 0cm; margin-left: 72pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 10pt; font-family: AGaramond; color: navy; ">Terre Haute<span class="apple-converted-space"> </span>IN<span class="apple-converted-space"> </span>47802 Give us a LIKE on Facebook!<span class="apple-converted-space"> </span><a href="https://www.facebook.com/pages/PianoRebuilderscom/137780082943148" style="color: blue; text-decoration: underline; ">Go to PianoRebuilders.com</a></span><o:p></o:p></p></div><div><div style="margin-left: 36pt; "><div class="MsoNormal" align="center" style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; text-align: center; "><hr size="2" width="100%" align="center"></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><b><span style="font-size: 10pt; font-family: Tahoma, sans-serif; ">From:</span></b><span class="apple-converted-space"><span style="font-size: 10pt; font-family: Tahoma, sans-serif; "> </span></span><span style="font-size: 10pt; font-family: Tahoma, sans-serif; "><a href="mailto:pianotech-bounces@ptg.org" style="color: blue; text-decoration: underline; ">pianotech-bounces@ptg.org</a><span class="apple-converted-space"> </span><a href="mailto:[mailto:pianotech-bounces@ptg.org]" style="color: blue; text-decoration: underline; ">[mailto:pianotech-bounces@ptg.org]</a><span class="apple-converted-space"> </span><b>On Behalf Of<span class="apple-converted-space"> </span></b>Encore Pianos<br><b>Sent:</b><span class="apple-converted-space"> </span>Tuesday, May 29, 2012 1:06 PM<br><b>To:</b><span class="apple-converted-space"> </span><a href="mailto:pianotech@ptg.org" style="color: blue; text-decoration: underline; ">pianotech@ptg.org</a><br><b>Subject:</b><span class="apple-converted-space"> </span>Re: [pianotech] S&S K(52) Restoration</span><o:p></o:p></div></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; "> </span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; ">This is what you need, all from Fastenal: Idea from Ron Nossaman originally I believe.</span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">3/8"-16 x 4" Black Oxide Alloy Steel Cup Point Socket Set Screw<o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">3/8-16 Nickel Plated Acorn Nut<o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">3/8"-16 Zinc Finish Case Hardened Serrated Flange Nut<o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">The Flange nut is inverted and epoxied in place along the length of the Allen set screw so that the shank will protrude far enough above the plate so that you can turn down the acorn nut without bottoming out before touching the top of the plate. An allen wrench in the head allows you to adjust the screw up or down as needed. Go to<span class="apple-converted-space"> </span><a href="http://Fastenal.com" style="color: blue; text-decoration: underline; ">Fastenal.com</a><span class="apple-converted-space"> </span>and you will find all these items. Much cheaper than WNG bolts. <o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">I have only used them on grands, but there is no reason why they would not work on an upright equally well.<o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">Will Truitt <o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; "> </span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; "> </span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; "> </span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; "> </span><o:p></o:p></div></div><div><div style="border-right-style: none; border-bottom-style: none; border-left-style: none; border-width: initial; border-color: initial; border-top-style: solid; padding-top: 3pt; padding-right: 0cm; padding-bottom: 0cm; padding-left: 0cm; border-width: initial; border-color: initial; "><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><b><span style="font-size: 10pt; font-family: Tahoma, sans-serif; ">From:</span></b><span class="apple-converted-space"><span style="font-size: 10pt; font-family: Tahoma, sans-serif; "> </span></span><span style="font-size: 10pt; font-family: Tahoma, sans-serif; "><a href="mailto:pianotech-bounces@ptg.org" style="color: blue; text-decoration: underline; ">pianotech-bounces@ptg.org</a><span class="apple-converted-space"> </span><a href="mailto:[mailto:pianotech-bounces@ptg.org]" style="color: blue; text-decoration: underline; ">[mailto:pianotech-bounces@ptg.org]</a><span class="apple-converted-space"> </span><b>On Behalf Of<span class="apple-converted-space"> </span></b>Gene Nelson<br><b>Sent:</b><span class="apple-converted-space"> </span>Tuesday, May 29, 2012 12:39 PM<br><b>To:</b><span class="apple-converted-space"> </span><a href="mailto:pianotech@ptg.org" style="color: blue; text-decoration: underline; ">pianotech@ptg.org</a><br><b>Subject:</b><span class="apple-converted-space"> </span>Re: [pianotech] S&S K(52) Restoration</span><o:p></o:p></div></div></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; ">Hello again,</span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; "> </span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; ">Just curious if anyone has had the pleasure of installing adjustable plate bolts on an upright.</span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; ">Without removing the plate just yet I count 20 perimeter plate screws that are centered on support dowels.</span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; ">A bit expensive to purchase the WNG’s .</span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; ">Anybody have any experience they want to share? Home made designs?</span><o:p></o:p></div></div><div style="margin-left: 36pt; "><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="color: black; ">Gene</span><o:p></o:p></div></div></div></div><div style="margin-top: 0cm; margin-right: 0cm; margin-left: 36pt; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div></div></div></div></span></blockquote></div><br></div></body></html>