I&#39;ve been trying to convince a fellow piano tech, who will be replacing his burnt-out Mighty-Mite vacuum, of the virtues of the Metro Vac &#39;n Blo that several of us own. It all got me to thinking about some of the minor irritations I&#39;ve had with mine. My primary gripe has been that it&#39;s round and it rolls over, sometimes making it annoying to find the on/off switch. I&#39;ve also always been a bit nervous about it rolling into a grand leg and marring it.  I decided to see what I could throw together in my apartment with supplies I had on hand.<div>
<br></div><div>I first sawed (in a miter box with a dull back saw) a piece of 1x8 pine to 13-1/2&quot;, and a couple pieces of 5/8&quot; dowel to 10-1/2&quot;. Glued and stapled (air gun stapler) the dowels to a width just enough to lift the outermost diameter off the 1x8. Why? So I can change bags easily, or just remove the intake end if I need more force on the output (&quot;Blo&quot;) end. </div>
<div><br></div><div>Pilot drilled for some simple cup hooks, dribbled the holes with CA, and hooked my tarp bungee cords (10 or 12 for a couple $$ at your locally-owned Ace Hardware). </div><div><br></div><div>Then I put some no-slip, self-adhesive protecto feet on the bottom and I&#39;m done.</div>
<div><br></div><div>Paul Bruesch</div><div>Stillwater, MN</div>