<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Ah, what one might call a console leg tourniquet. <br>
<br>
One thing to be sure of: have something wrapped tight or clamped around
the leg as you turn it back onto the screw, even if the glue is well
set up. . <br>
And of course it's important that the hole is sized properly after the
two pieces are glued back together. <br>
<br>
Susan Kline<br>
<br>
Larry Fisher RPT wrote:
<blockquote cite="mid:B36C44175EB74DDABE8E5ACEDF9226AA@LarryPC"
type="cite">
<div dir="ltr">
<div
style="font-family: 'Calibri'; color: rgb(0, 0, 0); font-size: 12pt;">
<div>Clamping is critical on repairs like this. You’ve GOT TO CLAMP
IT to get a good bond. If it’s round, cut a pair of round clamping
blocks to help keep the force of your clamps focused. If it defies
being clamped, there’s got to be someone that has a brainy idea on
this. I’ve never had the problem. I’ve seen rags wrapped around it
and twisted tight with a screwdriver wrapped around the rags acting
like a screw ......... much like tightening fence wire. That makes
it a bit rough to clean up oozage however plus you have the bond of the
rag to the leg to deal with.</div>
<div> </div>
<div>Good luck with this one Paul.</div>
<div> </div>
<div> </div>
</div>
</div>
</blockquote>
</body>
</html>