<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<font face="Arial">Yesterday I visited a new client, a very nice
family who have a 1912 Bechstein model 10 upright, straight
strung. A music student lodges with the family during term time
and they wanted the piano ready for him coming back. There had
been another tuner some months ago.<br>
<br>
What, I mused aloud upon taking off the top panel, was the strange
discoloration on the surface of the pinblock? I was then told
that the previous tuner had used WD40, applying it to the tuning
pin coils in case of any rust bonds.<br>
<br>
My inclination would be to keep WD40 or any similar lubricant a
mile away from tuning pins. But hey, whadda I know? Perhaps this
other guy is more up-to-date than I?<br>
<br>
What do you think folks? How "creepy" is WD40? Quite creepy, I
think, judging by how it's crept all over and into the surface of
the pinblock. And judging by how oily my fingers came to feel just
from slight contact as I lifted the tuning lever from pin to pin.<br>
<br>
How badly is it likely to have crept down the tuning pins into the
holes? The pins felt a little loose but not outrageously
oleaginously so. Would CA treatment work, with WD40 present?<br>
<br>
Best regards,<br>
<br>
David.<br>
<a class="moz-txt-link-abbreviated" href="http://www.davidboyce.co.uk">www.davidboyce.co.uk</a><br>
</font>
</body>
</html>