<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">
<DIV><FONT face=Arial>I have similar looking pianos on my database.&nbsp; On 
those that have this arrangement there’s a screw orientated vertically just 
above the area where you’re describing the L bracket’s location.&nbsp; I’m 
assuming this one doesn’t have that.&nbsp; The only other thing I can think of 
is a keyhole arrangement but if you’re convinced it’s a function of the L 
bracket then from the bottom you must proceed.&nbsp; It’s hard to believe the 
manufacturer would have made it that difficult. </FONT></DIV>
<DIV><FONT face=Arial></FONT>&nbsp;</DIV>
<DIV><FONT face=Arial>Some pianos have hidden screws under the front of the area 
you’ve sent an image of.&nbsp; Small little irritating stinkers that get lost 
easily.&nbsp; To find them you have to get on your knees (gently I might add), 
and stick your teeth right by the cheek blocks and you’ll see it just above the 
cheek block about 2 inches&nbsp; ........ uh 50mm&nbsp; ............&nbsp; 
especially if you wrinkle your nose so that the bifocals do their job there 
eh??</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial>In meantime, Marshall, we’ll all be on the look out for 
that tarpicular Knabe!!!</FONT>&nbsp;</DIV>
<DIV><FONT face="Times New Roman"></FONT>&nbsp;</DIV>
<DIV><FONT face="Times New Roman"></FONT>&nbsp;</DIV>
<DIV><FONT face="Times New Roman">I tuned a Knabe console today, an old one with 
the lyer in front of the bottom panel. I couldn't remove the top panel in order 
to tune it. Fortunately, I was able to tune it with the panel on as you can see 
in the picture but it was a tight fit. I did find an l shape metal bracket that 
I've often seen on pianos with three screws one which screws into the side of 
the piano and theother two into the front panel. 
</FONT></DIV></DIV></DIV></BODY></HTML>