David,<div><br></div><div>We did it here in my shop a year or so ago - 1926 M.  The new caster socket is larger and we ended up tipping the drill press table near vertical, clamping the leg in upside down and using a large forstner bit to enlarge the hole for the socket.</div>
<div><br></div><div>PITA, sort of, but it got done.  I was a little concerned about how much wood remained around the perimeter of the leg, but it&#39;s been fine.</div><div><br></div><div>William R. Monroe</div><div><br>
</div><div><br></div><div><br><div class="gmail_quote">On Fri, Sep 14, 2012 at 9:30 PM, David Love <span dir="ltr">&lt;<a href="mailto:davidlovepianos@comcast.net" target="_blank">davidlovepianos@comcast.net</a>&gt;</span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Have to replace some old casters (Steinway 1920s) with new ones.  Request is<br>
for nickel plated.  Does anyone have experience with the nickel plated<br>
casters from Steinway and how they fit in these 1920&#39;s sockets, how much<br>
retrofitting needs to be done etc.  The other option is to buy brass ones<br>
from the supply house which I know can be fitted with minimal chiseling and<br>
plate them but prefer not to have to go through the plating procedure if<br>
possible.  Have not had the experience of fitting current Steinway nickel<br>
casters in old Steinway leg sockets and the piano, of course, is not in my<br>
shop.<br>
<br>
Anyone with a similar experience?<br>
<span class="HOEnZb"><font color="#888888"><br>
David Love<br>
<a href="http://www.davidlovepianos.com" target="_blank">www.davidlovepianos.com</a><br>
<br>
<br>
<br>
</font></span></blockquote></div><br><br clear="all"><div><br></div>
</div>