<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19328">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2 face=Arial>Would be nice see a couple of pics of
this.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>CT </FONT></DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px"
dir=ltr>
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=formsma@gmail.com href="mailto:formsma@gmail.com">John Formsma</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, September 24, 2012 9:49
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [pianotech] GH1 - pitch
lock?</DIV>
<DIV><BR></DIV>The first thing that comes to my mind is will another
technician realize the Pitchlocks are there? It's fine as long as you're the
only one tuning it, but someone else might not notice them at first.
<DIV><BR></DIV>
<DIV>What about putting them close to the agraffe so they're more
visible?</DIV>
<DIV><BR></DIV>
<DIV>I've had good results with using Pitchlocks on some Steinways with lots
of front duplex noises. (On Steinway D's the C6-E6 area can be pretty awful.)
And have used them on bass bichords a time or two.</DIV>
<DIV><BR></DIV>
<DIV>-- <BR>
<DIV>John Formsma, RPT<BR></DIV>
<DIV>Blue Mountain, MS</DIV></DIV>
<DIV><BR><BR>
<DIV class=gmail_quote>On Mon, Sep 24, 2012 at 9:10 AM, Ron Koval <SPAN
dir=ltr><<A href="mailto:drwoodwind@hotmail.com"
target=_blank>drwoodwind@hotmail.com</A>></SPAN> wrote:<BR>
<BLOCKQUOTE
style="BORDER-LEFT: #ccc 1px solid; MARGIN: 0px 0px 0px 0.8ex; PADDING-LEFT: 1ex"
class=gmail_quote><BR>I finally have come face-to-face with what has been
written about for years..<BR>An "icky" Yamaha GH1, with the untunable group
of plain wire notes in<BR>the lower tenor section. I know I've tuned a
couple of GH1's in the past,<BR>but none were this terrible at the break.
B is the lowest plain wire, and from<BR>there up to about Eb, they
couldn't ever sound decent with the octave above.<BR><BR>I realize that
there are better, more permanent, costly options, but I wanted to
give<BR>this a try for a church where I rehearse with a men's
chorus...<BR><BR>I pulled out my little canister of pitch lock clips and
went to work on the <BR>bridge side of the strings - closer to the
bridge has a minimal effect, while<BR>further into the speaking length has a
more dramatic effect. The unison can<BR>be "tuned" by moving the clips
- the further from the bridge, the flatter the <BR>pitch.<BR><BR>It is
really, "less bad" than before. The downside is that the only way
to <BR>tune those strings now is with all three sounding - a nightmare!
That, or maybe<BR>sliding the pitch locks up and down. I'll be
experimenting as the weather changes...<BR><SPAN class=HOEnZb><FONT
color=#888888><BR>Ron Koval
</FONT></SPAN></BLOCKQUOTE></DIV><BR><BR clear=all>
<DIV><BR></DIV><BR></DIV></BLOCKQUOTE></BODY></HTML>