<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19154">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2 face=Arial>This week I'm going to see what happens to my
hammer line if I set hammer blow to achieve a specified amount of
aftertouch. I've set the key height, key dip and letoff. I'll put
the acton in the piano, use a .045 punching with a notch cut out so I can slide
it onto the front rail pin over the cloth punching with the key installed, and
set the hammer blow for each of the white keys such that a weight on the key (I
forget how many grams, and I'm not in the shop to check) brings it almost to
let-off, and a slight downward tap on the key will take it through
let-off. Theoretically, the straightness of the hammer line I achieve with
this procedure should allow me to evaluate how successful I was in setting even
key dip and consistent aftertouch.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I'm looking forward to seeing how it turns out. I
tried it with a sample, and arrived in the range of hammerblow I was
anticipating.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Floyd Gadd</FONT></DIV>
<DIV><FONT size=2 face=Arial>Regina, SK</FONT></DIV></BODY></HTML>