Thanks Joe,<div><br></div><div>I do &quot;do the math&quot;, or at least very rough math, to compensate for the restrictions imposed by only having 25% or 34% options. I thought Terry&#39;s statement that he uses the Sanderson method meant that he was using a SAT and that maybe his SAT was capable of calculating different percentages than my SAT3... he&#39;s since clarified that. (Thanks, Terry!)</div>
<div><br></div><div>I&#39;ve never attempted a blind overpull, and don&#39;t plan to any time in the foreseeable future. Even after (only) 8 years at this I don&#39;t feel comfortable enough to try it.</div>
<div><br></div><div>Paul Bruesch</div><div>Stillwater, MN<br><div class="gmail_extra"><br><br><div class="gmail_quote">On Tue, Oct 30, 2012 at 3:13 PM, Joe Goss <span dir="ltr">&lt;<a href="mailto:imatunr@srvinet.com" target="_blank">imatunr@srvinet.com</a>&gt;</span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><u></u>





<div bgcolor="#ffffff">
<div><font face="Arial">hi     Paul,</font></div>
<div><font face="Arial">if you do the math you can make the sat do any 
thing. on most pianos I measure a2 if it is say 40 cents flat I change it to 20 
and enter.</font></div>
<div><font face="Arial"> tune the bass. measure the first tenor note. 
if it is a spinet I deduct 5 percent from the reading and enter. large pianos 25 
percent.  recheck at </font></div>
<div><font face="Arial">Bb 4 or C 5 depending on how many notes are left 
before the break 25 percent re check at break and f6 c7 each time using 25 
percent</font></div>
<div><font face="Arial">I do check along the way and like to have the newly 
tunes note sharp of the octave and sort of in the ball park with the 4th and 
5th..</font></div>
<div><font face="Arial">around f6 I tune and leave the first and second 
string about 3 to 5 cts sharp and zero in the 3rd string. Check with ear and re 
tune if needed.</font></div>
<div><font face="Arial">The process takes me about 45 minutes with the 
piano ready to tune 15 to 30 minutes or 1:30 Min</font></div>
<div><font face="Arial">the above is done using heavy test 
blows.</font></div>
<div> </div>
<div><font face="Arial">Never have been successful with the blind over 
pull,it always results in me re tuning a squirrely piano several times to get it 
stable.</font></div>
<div><font face="Arial">The above tuning is done with heavy test 
blows</font></div>
<div><font face="Arial"><br>Joe<br><br></font></div></div></blockquote></div></div></div>