<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Marshall wrote:<br>
<br>
<blockquote cite="mid:BLU167-W594BA3E4FDC594C045D9A7B95B0@phx.gbl"
 type="cite">
  <div dir="ltr"><font face="Arial" size="3">Like one tech told me out
here, the plastic replacemetns will out live me and the customer. <br>
  </font></div>
</blockquote>
<br>
<font face="Courier New, Courier, monospace">A good point, Marshall.
Sadly, it gets to be a better point all the time. <br>
The only problem I've ever had with the replacements is having an elbow
or <br>
two pop off the center pin. And for awhile I had to trim the bushings,
which <br>
were roughly cut. I said something to myself like, "you need to train
your <br>
pet squirrel better." <br>
</font><br>
<blockquote cite="mid:BLU167-W594BA3E4FDC594C045D9A7B95B0@phx.gbl"
 type="cite">
  <div dir="ltr"><font face="Arial" size="3"> Have any of you done an
elbow job in the customers home without taking the action out?</font><br>
  <font face="Arial" size="3"></font><br>
  </div>
</blockquote>
<font face="Courier New, Courier, monospace">I used to do that fairly
often. It was a moot point whether it was easier <br>
to grub around on the floor, with my head bent to get under the keybed,
or <br>
to take the action out and then have to put it back in. Now that I'm
older, <br>
no contest. It comes out, so I can do it at a civilized height, on a
table. <br>
<br>
Like your first point (we're all getting older) times change. I hardly
find <br>
any old plastic elbows in pianos anymore. Most have been replaced (or
the piano <br>
thrown out) already by now. On the other hand, there still seems to be
a lot of <br>
rock-hard corfam on butts and catches out there. <br>
<br>
Susan<br>
</font>
</body>
</html>