<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>Hi John,</div><div>The key is not supported because it does not wander.</div><div>The adjustment table lets you take off such a small amount. </div><div>I have never had a problem with it.</div><div><br></div><div>Jack Houweling <br><br>Sent from my iPhone</div><div><br>On 2012-12-02, at 10:45 AM, John Ross <<a href="mailto:jrpiano@bellaliant.net">jrpiano@bellaliant.net</a>> wrote:<br><br></div><blockquote type="cite"><div><meta http-equiv="Content-Type" content="text/html charset=us-ascii">Hi Jack,<div>It looks like the key is not supported, or has a stop.</div><div>Do you have a problem with the key wanting to wander?</div><div>I know using a router 'jig', the key must be secure.</div><div>I can see that having the router secured and using a 'table' might be a better option.</div><div>Is the table just a wood on wood situation with a lubricant, for sliding?</div><div>John Ross</div><div>Windsor, Nova Scotia<br><div><div>On 2012-12-02, at 2:13 PM, Jack Houweling <<a href="mailto:jackhouweling@dccnet.com">jackhouweling@dccnet.com</a>> wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite">I built a thickness sander for cleaning up keytops, it is a spindle sander on a drill mounted on a base. The table fine adjusts with a large knob. For the fronts I use a fine adjust sled on my table saw.<br><br>Jack Houweling <br><br><span><photo.JPG></span><br><br><br><br>Sent from my iPhone</blockquote></div><br><div> </div> <br></div></div></blockquote></body></html>