<html><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">Hi, Larry!<div>The Lid Alignment set-up" is called  the "Lid Catcher".</div><div>It comes   in  2 parts:- "Male and Female:  and can be easily positioned with Double-Sided Masking Tape.</div><div>best wishes for holidays!</div><div>Isaac<br><div><div>On Dec 20, 2012, at 7:07 AM, Larry Fisher RPT wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite"> <div dir="ltr"> <div dir="ltr"> <div style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt"> <div>I’ve always used round wooden toothpicks and wood glue for this Paul.</div> <div> </div> <div>I’m assuming you mean the major hinges for the entire lid assembly and not the long half lid hinge.  If there’s only two hinges at this point it won’t be long and you’ll need to add a third one  ....   so that might be a good idea anyway at this point in time before the lid is opened and scribes an arc across the bottom of it.  Last I heard that’s not a widely accepted decoration idea.  </div> <div> </div> <div>An additional damage reducer would be to add a lid alignment set up  ........  for lack of proper terminology.  Some grands have a thick pin mounted under the lid at the opposite end of the lid from the hinges that lines up with the appropriate socket mounted on the rim.  That would be a small expense to the school at this point in time compared to the resulting losses later.</div> <div> </div> <div>I just spent a few minutes looking through the Schaff Catalog and I didn’t see it in there.</div></div></div></div></blockquote></div><br></div></body></html>