<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>
Doug, that´s interesting. I found the USA website of König and found French Polish. But on the German Site there is no Schellack or French Polish. I attented a class at König about scratch repair with the focus on Polyester, but all other surfaces were tought as well. I don´t remember that they offer French Polish in Germany.<BR> <BR>How do you use the French Polish? As a quick and dirty method just applying with a bale or do you prepare the surface? What would you do with the fallboard example form Michael?<BR> <BR>Gregor<br><br>------------------------<br>piano technician - tuner - dealer<br>Münster, Germany<br>www.weldert.de<br><br> <BR><div>> Date: Fri, 25 Jan 2013 11:36:20 -0500<br>> From: classicpianodoc@gmail.com<br>> To: pianotech@ptg.org<br>> Subject: [pianotech] How to remove scratches<br>> <br>> Michael,<br>> I repair such scratches all the time with French polishing. I gave a<br>> seminar on it in Seattle. It is quite easy to do. It works so well for<br>> this kind of thing because it only adds a thin layer of shellac and<br>> there is no risk as there is with sanding and polishing. The beauty of<br>> French polishing is it fills the scratches selectively without<br>> building up finish on the non-scratched area. That is, it fills the<br>> valleys up to the top of the hills leaving a glass-smooth surface. It<br>> is also very safe and I often do it in the clients music room over an<br>> Oriental carpet with no concern of odor or spills or overspray. I use<br>> Konig Special French polish from www.konignorthamerica.com. Or google<br>> Konig french polish. They also have videos.<br>> <br>> The alternate quick and dirty solution is to spray the fall board with<br>> several coats of clear lacquer. Then fine sand and polish the new<br>> lacquer without the danger of damaging the black underneath. I find<br>> that polishing lacquer to a high polish is not that easy. I would sand<br>> it with 400 and then 600 paper with water, dry, and then give a final<br>> coat of spray that lays down flat. Do that outside if possible. The<br>> fumes are strong. French polish still comes out better and is three<br>> times as fast. There is no waiting for lacquer to dry and no sanding.<br>> <br>> See my web site to see French polishing before, during, and after.<br>> www.classicpianodoc.com<br>> <br>> Doug Gregg<br>> Classic piano Doc<br>> Southold, NY<br>> <br>> Message: 1<br>> Date: Thu, 24 Jan 2013 17:00:01 -0800 (PST)<br>> From: MICHAEL MEZHINSKY <pghpianotuning@yahoo.com><br>> To: "pianotech@ptg.or" <pianotech@ptg.org><br>> Subject: [pianotech] How to remove scratches<br>> Message-ID:<br>> <1359075601.24779.YahooMailNeo@web160205.mail.bf1.yahoo.com><br>> Content-Type: text/plain; charset="iso-8859-1"<br>> <br>> Hello,<br>> Can anyone suggest how?to remove scratches on the black lacquer finish<br>> fall board on a 1932 piano or make it look better?<br>> The picture is attached.<br>> Thanks for your help.<br>> Michael Mezhinsky RPT<br>> -------------- next part --------------<br>> An HTML attachment was scrubbed...<br>> URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130124/dfc8a452/attachment-0001.htm><br>> -------------- next part --------------<br>> A non-text attachment was scrubbed...<br>> Name: mail[1].jpg<br>> Type: image/jpeg<br>> Size: 7010 bytes<br>> Desc: not available<br>> URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130124/dfc8a452/attachment-0001.jpg><br></div>                                            </div></body>
</html>