<HTML style="FONT-FAMILY: MS Sans Serif; FONT-SIZE: x-small"><HEAD> <META name=GENERATOR content="MSHTML 8.00.6001.19394"></HEAD> <BODY bgColor=#ffffff> <DIV> <DIV>Rick,</DIV> <DIV>My approach would be to modify the entire system. This, I would do, by removing all of the dampers and the back action. With all of the levers still glued to the rail, I would drill an appropriate hole through the flange, to the depth of the rail, plus the "v" of the drill bit into the rail, as a future guide for the thread drill holes. Then, I'd pop off all the levers, (first numbering all of them.<G>). Next, I'd drill the thread holes in the rail. Next, I would install 120 grit sand paper with appropriate holes punched out for the screw holes. Reinstall all levers and then reinstall the backrail into the piano. The only other alternative would be to get a new kit for the back action from Renner. </DIV> <DIV>I've tried to reglue those suckers with all the dampers in the way, etc. It's a fool's errand, imo.</DIV> <DIV>Hope that helps.</DIV> <DIV>Joe</DIV> <DIV> </DIV> <DIV></DIV></DIV> <DIV> </DIV> <BLOCKQUOTE style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px"> <DIV style="FONT: 10pt Arial">----- Original Message ----- </DIV> <DIV style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B> <A title=richarducci@comcast.net href="mailto:richarducci@comcast.net"></A></DIV> <DIV style="FONT: 10pt arial"><B>To: </B><A title=joegarrett@earthlink.net href="mailto:joegarrett@earthlink.net">joegarrett@earthlink.net</A></DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> 1/31/2013 5:16:50 AM </DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Fwd: Steinert grand</DIV> <DIV><BR></DIV><FONT size=2> <DIV>Joe, I'm forwarding this question over to you. Can you clue me in?<BR><BR>Rick Ucci <DIV><A href="http://Uccipiano.com">Uccipiano.com</A></DIV> <DIV>609-677-0444</DIV></DIV> <DIV><BR>Begin forwarded message:<BR><BR></DIV> <BLOCKQUOTE type="cite"> <DIV><B>From:</B> <A href="mailto:richarducci@comcast.net"><A href="mailto:richarducci@comcast.net">richarducci@comcast.net</A></A><BR><B>Date:</B> January 29, 2013 11:01:25 PM EST<BR><B>To:</B> <A href="mailto:pianotech@ptg.org"><A href="mailto:pianotech@ptg.org">pianotech@ptg.org</A></A><BR><B>Subject:</B> <B>Steinert grand</B><BR><BR></DIV></BLOCKQUOTE> <DIV></DIV> <BLOCKQUOTE type="cite"> <DIV><SPAN>List,</SPAN><BR><SPAN>Working on an interesting Steinert grand today, a damper flange came unglued and I need to know how to access the area in the back action to reglue it.</SPAN><BR><SPAN>No screws , it lays flat on a shelf. </SPAN><BR><SPAN></SPAN><BR><SPAN>Rick Ucci</SPAN><BR><SPAN><A href="http://Uccipiano.com">Uccipiano.com</A></SPAN><BR><SPAN>609-677-0444</SPAN></DIV></BLOCKQUOTE></FONT></BLOCKQUOTE></BODY></HTML>