<div dir="ltr"><div><div><div>I&#39;m about to replace my first Pinblock. It&#39;s on Mini Piano named Gerard, and one can follow the progress here: <br><br><a href="https://www.facebook.com/media/set/?set=a.414081118675357.98495.146765508740254&amp;type=1">https://www.facebook.com/media/set/?set=a.414081118675357.98495.146765508740254&amp;type=1</a><br>
<br></div>The pinblock severely pulled away from the posts. It is a 3/4 plate, and there are large gaps behind the pinblock with no support. That&#39;s my current concern. I had epoxied and bolted the pinblock a few years ago, and it held for a couple years. My plan is to reread Chuck&#39;s Replacing the Pinblock series which was published a couple years ago in the Journal (and which I read at the time) and follow those steps. However, I believe<img alt="Inline image 1" src="cid:ii_13c9cafecb52c08a"> I will need to add supports, fill in those gaps between the posts. <br>
<br></div>Any glaring issues or recommendations from you experienced rebuilders before I start?<br><br></div>Thanks!<br><br><br></div>