<p>Repeat the twist that was there at the time of removal. Or. Put all bass strings on with no twist. Check the tone and twist as desired. Generally I have found that a half twkst per string is enough.<br>
Tony<br>
On Feb 14, 2013 9:47 PM, "Terry Farrell" <<a href="mailto:mfarrel2@tampabay.rr.com">mfarrel2@tampabay.rr.com</a>> wrote:<br>
><br>
> I will be re-installing a set of bass strings on a 20/30 year old Baldwin console today. Strings were removed from bridge to allow re-attaching bridge. I am certainly aware that the various string makers have recommended installation procedures regarding no-twist, half-twist, etc. being applied to a newly-installed string.<br>
><br>
> But how about older original strings. Is anyone aware of any special protocol for twisting older strings upon re-installation?<br>
><br>
> Thanks!<br>
><br>
> Terry Farrell</p>