<HTML style="FONT-SIZE: medium; FONT-FAMILY: AGaramond Bold"><HEAD> <META http-equiv=Content-Type content="text/html; charset=windows= -1251"> <META content="MSHTML 6.00.2800.1522" name=GENERATOR></HEAD> <BODY style="BORDER-TOP-STYLE: none; BORDER-RIGHT-STYLE: none; BORDER= -LEFT-STYLE: none; BORDER-BOTTOM-STYLE: none"> <P><BR>Any difference between Schaff's and Pianotek's?   </P>= <P><BR>David Ilvedson, RPT<BR>Pacifica, California<BR><BR><BR><BR></P> <DIV style="PADDING-RIGHT: 5px; PADDING-LEFT: 5px; PADDING-BOTTOM: 5p= x; BORDER-LEFT: #000000 3px solid; PADDING-TOP: 5px"> <HR> Original message<BR>From: "Joseph Garrett" <JOEGARRETT@EARTHLINK.NET><B= R>To: pianotech <PIANOTECH@PTG.ORG><BR>Received: 1/5/2006 10:33:25 PM<B= R>Subject: Adhesives for Plastic....(Yeah, I changed it)<BR><BR> <P> <DIV align=left>"BTW never, never, never, ever use any contact cement= --- except water-based -- for plastic keytops. Unless you want to watc= h them dissolve ..."</DIV> <DIV> </DIV> <DIV>Where the heck did you get that bit of misinformation!??? Contact = cement has been used forever, by one of our locals. (I used it for seve= ral years, as well.) He refuses to use anything else. His work is impec= cable! No warping or any other signs of warping, etc. The only reason I= quit using him, is that I don't like the look I get/got from clients w= hose keytops were falling off, after only a few years!!! Hence, I do my= own keytops and I use PVC-E, (from Schaff). It definately takes a lot = more time to do them this way, but the tops will stay on! Worth the ext= ra time involved, IMO.</DIV> <DIV>Regards,</DIV> <DIV> </DIV> <DIV>Joe Garrett, R.P.T. (Oregon)</DIV> <DIV>Captain, Tool Police</DIV> <DIV>Squares R I</DIV> <DIV> </DIV> <DIV> </DIV> <P></P></DIV></BODY></HTML>