<HTML> <HEAD> <TITLE>Re: travelling paper</TITLE> </HEAD> <BODY> <BLOCKQUOTE>I use masking tape. Before travelling the hammers, I lay out ab= out 6" of 1" masking tape on a piece of 1x3 and use a razor blade = to slice it into strips about 1/8" wide. These are easy to pick up with= tweezers, easy to place, stay where you put them, and are easy to remove.<B= R> </BLOCKQUOTE> || ||| || ||| || ||| || ||| || ||| || ||| || ||| || ||| jason kanter * piano tuning * piano teaching bellevue, wa * 425 562 4127 * cell 425 831 1561 orcas island * 360 376 2799 || ||| || ||| || ||| || ||| || ||| || ||| || ||| || ||| <BLOCKQUOTE>From: Wimblees@AOL.COM Reply-To: pianotech@ptg.org Date: Wed, 3 Apr 2002 09:05:21 EST To: pianotech@ptg.org Subject: Re: travelling paper </BLOCKQUOTE> <BLOCKQUOTE>In a message dated 4/2/02 3:13:01 PM Central Sta= ndard Time, baoli_liu@yahoo.com writes: <BLOCKQUOTE>Hi list, Where can I buy the travelling paper? I mean the big roll of brown paper with gule on one side. Thanks! Baoli Liu,RPT </BLOCKQUOTE> Why brown, and why with glue on one side? I use card stock, cut into strips. No, it doesn't stay there when you take = off the hammer, but you can remove it easy when you make a mistake. So you h= ave to do it again whenever you do take the flange off, but it doesn't take = that long to do it. Wim </BLOCKQUOTE> </BODY> </HTML>