<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2719.2200" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>Hello,</FONT></DIV> <DIV><FONT face=Arial size=2>I thank you all in advance for any = advice you can give.  I had an interesting call today.  This customer has a verticle piano with thte action missing due to = an old tuner who collected their action and then moved away and/or = died.  Apparently these were in a severe car crash some time after he received = the action.  By the time they were back up and about, the tuner was not = to be found.  The keys were left with the piano.  About five years = have since past.  The piano is a "Kurtzman" 45" upright with #141252.  From what I can tell this is a Wurlitzer = stencil piano from 1936.  There are 10 monochords, and 22 bichords on the bass bridge.  The tenor has 21 trichords, and the treble 35 = trichords.  Are there action rail blanks and action brackets available for such a = piano.  I'm sure I could duplicate the rails if need be, but redesigning = everything would be a challenge, for me, to say the least.  Does anyone = have any other ideas about retrofitting an action for this piano?  Does = anyone have a spare action that might fit this piano?  This piano has = significant sentimental value to the customer.  Thanks again.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Colin Kenny</FONT></DIV> <DIV><FONT face=Arial size=2>Peru, IN</FONT></DIV></BODY></HTML>