<html>
<font size=3>At 03:00 PM 05/01/2001 -0400, you wrote:<br>
<blockquote type=cite cite>the house are not options. There is no buzzing
- just a dead bass <br>
section. Strings are in good shape.</font></blockquote><br>
All the epoxy in the world will not give this piano more tone. Don't
waste your time<br>
filling the cracks, nothing will come of it except to fill your pockets
with the customer's money.<br>
<br>
If the bass is dead, look for the reason: loose ribs, loose board on the
rim, loose bridge cap/body,<br>
bearing, bad strings, dead board. Cracks in the board do not cause a dead
bass.&nbsp; If there is loose<br>
board, glue it back down, that will have an affect on the tone. don't
bother with the cracks.<br>
<br>
<blockquote type=cite cite><font size=3>One further question: Has anyone
who has used the epoxy crack filling <br>
method on soundboards noticed any appreciable improvement in sound?<br>
Thanks again,&nbsp; Wally Scherer</font></blockquote><br>
I have filled the cracks with epoxy while restringing for cosmetic
reasons. The piano sounded better<br>
because of the new strings, not the filled cracks.<br>
<br>
Regards,<br>

Jon Page,&nbsp;&nbsp; piano technician<br>
Harwich Port, Cape Cod, Mass.<br>
<a href="mailto:jonpage@mediaone.net" eudora="autourl">mailto:jonpage@mediaone.net</a><br>
<font size=3><a href="http://www.stanwoodpiano.com/" eudora="autourl">http://www.stanwoodpiano.com<br>
</a></font>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~</html>