<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>Loose S&S bracket</title></head><body>
<div>Ok, we've side-stepped the question here:</div>
<div><font face="Arial" size="-4" color="#000000">>Short of firing
up the propane, I was thinking of drilling for set</font></div>
<div><font face="Arial" size="-4" color="#000000">>screws and
reinforcing the joint with epoxy or thick CA. Any thoughts ?
...</font></div>
<div><br></div>
<div>My thought is to use a long clamp to position the bracket flush
with the ends of the rails</div>
<div>and drill for screws. Then probably tap the leading side of the
bracket and use a self-tapping</div>
<div>machine screw to drive it home and finish with wicking epoxy or
thick CA into the area surrounding</div>
<div>the rails. Remember, this is the bass end bracket.</div>
<x-sigsep><pre>--
</pre></x-sigsep>
<div><br>
Regards,<br>
<br>
Jon Page</div>
</body>
</html>