<HTML><HEAD></HEAD>
<BODY>
<P align=left><FONT face=arial,helvetica><FONT size=2></FONT></FONT>There are some excellent articles by Bill Spurlock in the Journal and on the Journal CD, I believe.&nbsp; Use something to block the bass strings from sustaining and play the offending note.&nbsp; If the ringing is gone the bass dampers are the problem, which is typical.&nbsp; Often they are 1" dampers.&nbsp; That Yamaha has 2 &amp; 3/8" dampers, I think.&nbsp; Replacing the bass dampers and regulating will take care of the problem.&nbsp; If after blocking the strings the offending note still has some ringing, then move that tenor damper up and down and make sure it is seating correctly.&nbsp; Change it to a bi/tri-chord.&nbsp; The over-damper is usually the last resort and most often you can fix it before that.</P>
<P align=left>Good luck and be sure to read the Spurlock articles under "Basic Skills" or something like that...</P>
<P align=left>David Ilvedson, RPT</P>
<P align=left>&nbsp;</P>
<P align=left>&nbsp;</P>
<P align=left><FONT face=arial,helvetica><FONT size=2></FONT></FONT>&nbsp;</P>
<P align=left><FONT face=arial,helvetica><FONT size=2>----- Original message ----------------------------------------&gt;<BR>From: &lt;<A href="mailto:Piannaman@AOL.COM">Piannaman@AOL.COM</A>&gt;<BR>To: &lt;<A href="mailto:pianotech@ptg.org">pianotech@ptg.org</A>&gt;<BR>Received: Thu, 25 Jul 2002 02:18:57 EDT<BR>Subject: Damper Overring inn Ludwig Upright</FONT></FONT></P>
<P align=left><FONT face=arial,helvetica><FONT size=2><BR>List, <BR><BR>I have a customer who has a nice old Ludwig upright that has a problem with partials being excited because of where the dampers land on the strings--I think. &nbsp;There is quite a bit of overring when the dampers move back onto the strings. &nbsp;Isn<BR><BR>I worked on a Yamaha WX-7 today that had the beefiest dampers I've ever seen in the upper bass section, and double dampers just above the break. &nbsp;No overring there. &nbsp; <BR><BR>The customer would like to get rid of the problem. &nbsp;Any suggestions on this besides replacing all of the dampers? &nbsp; <BR><BR>Thanks in advance for any input, <BR><BR>Dave Stahl <BR></P></FONT></FONT></BODY></HTML>