<HTML><HEAD> <META http-equiv=Content-Type content="text/html;= charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1400" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff>Terry,<BR><BR>pictures would be helpful if= you can do that...<BR><BR>David I.<BR><BR><BR><BR><BR> <DIV style="PADDING-RIGHT: 5px; PADDING-LEFT: 5px;= PADDING-BOTTOM: 5px; BORDER-LEFT: #000000 3px solid;= PADDING-TOP: 5px"> <HR> Original message<BR>From: Terry <TERRY@FARRELLPIANO.COM><BR>To:= <PIANOTECH@PTG.ORG><BR>Received: Mon, 28 Feb 2005 20:26:50= -0500<BR>Subject: Action Center Pin Progression<BR><BR> <DIV align=left><FONT face=Arial size=2>I am in the process of= repinning all action centers on a set of wippens, and flanges on= the back-action. I like using the long Renner pinning wire.= Unfortunately, in the range of sizes I need to work with, Renner= only offers wire in 0.05 millimeter increments. This fairly= closely compares to 0.002-inch increments. If I use the Renner= wire, and 1.30 mm wire (about 0.051-inch) is just a tad too= loose - it would be ideal to use 1.325 wire (which would be= roughly equal to a 0.052-inch), but unfortunately, Renner only= offers their wire in the next size increment at 1.35 mm.= </FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>My question is this - does jumping= up 0.05 mm (or 0.002-inch) significantly increase the risk of= splitting the birdseye? Obviously, if I used the regular little= individual center pins, I could limit the jump to 0.025 mm= (0.001-inch). Is this a big deal or what?</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Terry= Farrell</FONT></DIV></DIV></BODY></HTML>