<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>In a message dated 6/13/02 1:44:12 AM Pacific Daylight Time, A440A@AOL.COM writes:
<BR>
<BR>
<BR><BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Greetings,
<BR> Sometimes it helps to us a much longer wire than will ultimately be
<BR>necessary and to pre-bend the end of this extra length so that it "wants" to
<BR>come back up after going under the pressure bar. Then, you cut to length and
<BR>wind on a dummy before final installation on the pin.
<BR>Another reason I hate to work on uprights.....
<BR>Regards,
<BR>Ed Foote
<BR></FONT><FONT COLOR="#000000" SIZE=3 FAMILY="SANSSERIF" FACE="Arial" LANG="0"></BLOCKQUOTE>
<BR></FONT><FONT COLOR="#000000" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">
<BR>Ed,
<BR>
<BR>I actually tried that, and I could NOT for the life of me get it through. Should have been more persistent, I guess. At least I cut the wire plenty long, which gave me plenty of margin for errors....
<BR>
<BR>Thanks,
<BR>
<BR>Dave</FONT></HTML>