<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2716.2200" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY style="MARGIN-TOP: 2px; FONT: 8pt MS Sans Serif; MARGIN-LEFT: =
2px"
bgColor=#ffffff>
<DIV><FONT face=Arial size=2>&nbsp;&nbsp;&nbsp; Mark, et al; Your =
suggestion
works great. What I did was to go to Radio Shack and buy 1/4" heat =
shrink
tubing, cut a small piece off and heat it to the shank. That way, you =
don't have
to clamp down! A really cheap fix too. Nobody needs to feel a tuning =
fork
vibrating on their teeth!</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT>&nbsp;</DIV>
<DIV><FONT face=Arial size=2></FONT>&nbsp;</DIV>
<DIV>Kevin E. Ramsey<BR><A
href="mailto:ramsey@extremezone.com">ramsey@extremezone.com</A></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV
  style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
  <A title=MWisner@yamaha.com href="mailto:MWisner@yamaha.com">Mark =
Wisner</A>
  </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
  href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, May 24, 2002 =
10:26 AM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: not enough hands =
-- setting
  A49 to fork</DIV>
  <DIV><BR></DIV>
  <DIV><FONT size=1>I clamp down on the end of the fork stem&nbsp;with =
my teeth,
  freeing up both hands.&nbsp;&nbsp;My wife, who is a dentist, doesn't =
approve
  but you can REALLY hear the fork.&nbsp; Of course you have to be =
careful where
  you put the fork when you're not using it.....&nbsp;</FONT></DIV>
  <DIV>&nbsp;</DIV>
  <DIV><FONT size=1>Mark Wisner<BR>Yamaha Corporation<BR><A
  =
href="mailto:mwisner@yamaha.com">mwisner@yamaha.com</A></FONT><BR><BR>&=
gt;&gt;&gt;
  <A href="mailto:piano@charlesneuman.net">piano@charlesneuman.net</A> =
05/24/02
  09:43AM &gt;&gt;&gt;<BR>When setting A49 to the fork, I like to =
compare
  F21-fork with F21-A49. It<BR>seems that I need three hands to do this: =
One to
  play F21, one to hold the<BR>fork or play A49, and one to move the
  lever.<BR><BR>Since I only have 2 hands, I keep F21 held down by =
putting a
  mute sort of<BR>sideways and resting on the backchecks of the =
neighboring
  notes (on a<BR>vertical piano) so that it blocks F21 in the depressed
  position. Or I can<BR>jam a mute along the top of the key to keep it =
down, but
  that seems like<BR>it would mess up the felt right above the keytop. =
Once it's
  held down,<BR>then I can compare F21-fork and then tune F21-A49 to =
that same
  beat rate.<BR><BR>Are there any other techniques I should
  consider?<BR><BR>Charles Neuman<BR>PTG Associate, Long
  Island-Nassau<BR><BR></DIV></BLOCKQUOTE></BODY></HTML>