<html>
<font size=3>Hi wayne,<br>
The light surface marks can be rubbed out with 0000 steel wool, ( gently
does it) if it has indented the finish then you need a professional
refinisher to do a good job. remember to rub with the grain of the
previous rubbing.<br>
Regards Roger<br>
<br>
At 07:02 AM 3/16/02 -0500, you wrote:<br>
>hi there<br>
><br>
>what could i do to touch up the ebonized finish on a stienway lid. it
is<br>
>not scratched . but there are two lines that have been rubbed
onto the<br>
>lid.<br>
>any suggestions.<br>
><br>
>wayne<br>
> </font><br>
</html>