<HTML>In a message dated 9/29/02 1:58:24 PM !!!First Boot!!!, jonpage@attbi.com writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">I've been on the lookout for long sandpaper strips to replace the old paper on the rails rather than piecing in strips cut from sheets. </BLOCKQUOTE> 3 M Makes 25 yards strips of 1" wide cloth backed wet and dry sandpaper. About 10 years ago I bought two grits, 180 and 120.  I use these strips not only for hammer rails, but also for polishing hammers, and I glue it to strips of wood for sandpaper files. I hope they still make this stuff, because I'm almost out of both rolls. Wim </HTML>