<html>
<body>
Bob,<br>
<x-tab> </x-tab>We did
address this a while back. Your Journal this month has some of the copied
postings. In my experience a diagonally cut kerf will do wonders for you.
Experiment on a scrap piece of wood if your not sure which direction to
cut the kerf. <br><br>
Greg Newell<br><br>
<br>
At 09:55 PM 4/1/2003, you wrote:<br><br>
<blockquote type=cite class=cite cite>List,<br><br>
I tuned a Baldwin Hamilton today that has a twisted or warped white
key. It can't be leveled with the others or squared. The
front of the key is twisted compared to the back. When you set it
on a flat surface you can really see the twist - the front left corner of
the key is up in the air about 1/8". I know sometimes
you can force a wedge into a kerf cut into a key that is bent or warped,
but it doesn't seem like that would work on this twisted key. I
would appreciate your suggestions. <br><br>
Bob<br><br>
<br>
<br>
Do you Yahoo!?<br>
<a href="http://us.rd.yahoo.com/finance/mailsig/*http://tax.yahoo.com">Yahoo!
Tax Center</a> - File online, calculators, forms, and more <br>
---<br><br>
Checked by AVG anti-virus system
(<a href="http://www.grisoft.com/" eudora="autourl">http://www.grisoft.com</a>).<br>
Version: 6.0.465 / Virus Database: 263 - Release Date:
3/25/2003</blockquote>
<x-sigsep><p></x-sigsep>
Greg Newell<br>
<a href="mailto:gnewell@ameritech.net" eudora="autourl">mailto:gnewell@ameritech.net</a></body>
</html>